专业北京翻译公司,热线010-65677906

请在文本框里输入你要查找的内容:
关键词:
 
翻译语种服务

通用机械设备词汇英文译法

齿轮   Toothed gear;Gear
齿轮副   Gear pair
平行轴齿轮副   Gear pair with parallel axes
相交轴齿轮副   Gear pair with intersecting axes
齿轮系   Train of gears
行星齿轮系   Planetary gear train
齿轮传动   Gear drive;Gear transmission
配对齿轮   Mating gears
小齿轮   Pinion
大齿轮   Wheel;Gear
主动齿轮   Driving gear
从动齿轮   Driven gear
行星齿轮   Planet gear
行星架   Planet carrier
太阳轮   Sun gear
内齿圈   Ring gear;Annulus gear
外齿轮   External gear
内齿轮   Internal gear
中心距   Centre distance
轴交角   Shaft angle
连心线   Line of centres
减速齿轮副   Speed reducing gear pair
增速齿轮副   Speed increasing gear pair
齿数比   Gear ratio
传动比   Transmission ratio
轴平面   Axial plane
基准平面   Datum plane
节平面   Pitch plane
端平面   Transverse plane
法平面   Normal plane
分度曲面   Reference surface
节曲面   Pitch surface
齿顶曲面   Tip surface
齿根曲面   Root surface
基本齿廓   Basic tooth profile
基本齿条   Basic rack
产形齿条   Counterpart rack
产形齿轮   Generating gear of a gear
产形齿面   Generating flank
基准线   Datum line
轮齿   Gear teeth;Tooth
齿槽   Tooth space
右旋齿   Right-hand teeth
左旋齿   Left-hand teeth
变位齿轮   Gears with addendum modification;X-gears
高度变位圆柱齿轮副   X-gear pair with reference centre distance
角度变位圆柱齿轮副   X-gear pair with modified centre distance
高度变位锥齿轮副   X-gear pair without shaft angle modification
角度变位圆柱齿轮副   X-gear pair with shaft angle modification
变位系数   Modification coefficient
变位量   Addendum modification
径向变位系数   Addendum modification coefficient
中心距变位系数   Centre distance modification coefficient
圆柱齿轮   Cylindrical gear
顶圆   Tip circle
根圆   Root circle
齿距   Pitch
齿距角   Angular pitch
公法线长度   Base tangent length
分度圆直径   Reference diameter
节圆直径   Pitch diameter
基圆直径   Base diameter
顶圆直径   Tip diameter
根圆直径   Root diameter
齿根圆角半径   Fillet radius
齿高   Tooth depth
工作高度   Working depth
齿顶高   Addendum
齿根高   Dedendum
弦齿高   Chordal height
固定弦齿高   Constant chord height
齿宽   Facewidth
有效齿宽   Effective facewidth
端面齿厚   Transverse tooth thickness
法向齿厚   Normal tooth thickness
端面基圆齿厚   Transverse base thickness
法向基圆齿厚   Normal base thickness
端面弦齿厚   Transverse chordal tooth thickness
固定弦齿厚   Constant chord
端面齿顶厚   Crest width
法向齿顶厚   Normal crest width
端面齿槽宽   Transverse spacewidth
法向齿槽宽   Normal spacewidth
齿厚半角   Tooth thickness half angle
槽宽半角   Spacewidth half angle
压力角   Pressure angle
齿形角   Nominal pressure angle
圆弧圆柱蜗杆   Arc-contact worm;hollow flank worm;ZC-worm
直廓环面蜗杆   Enveloping worm with straight line grneratrix;TA worm
平面蜗杆   Planar worm wheel;P-worm wheel
平面包络环面蜗杆   Planar double enveloping worm;TP-worm
平面二次包络蜗杆   Planar double-enveloping worm wheel;TP-worm wheel
锥面包络环面蜗杆   Toroid enveloping worm wheel;TK-worm wheel
渐开线包络环面蜗杆   Toroid enveloping worm hich involute holicoid generatrix;TI-worm
锥蜗杆   Spiroid
锥蜗轮   Spiroid gear
锥蜗杆副   Spiroid gear pair
中平面   Mid-plane
长幅内摆线   Prolate hypocycloid
短幅内摆线   Curtate hypocycloid
渐开线   Involute;Involute to a circle
延伸渐开线   Prolate involute
缩短渐开线   Curtate involute
球面渐开线   Spherical involute
渐开螺旋面   Involute helicoid
阿基米德螺旋面   Screw helicoid
球面渐开螺旋面   Spherical involute helicoid
圆环面   Toroid
圆环面的母圈   Generant of the toroit
圆环面的中性圈   Middle circle of the toroid
圆环面的中间平面   Middle-plane of the toroid
圆环面的内圈   Inner circle of the toroid
啮合干涉   Meshing interference
切齿干涉   Cutter interference
齿廓修型   Profile modification;
Profile correction
修缘   Tip relief
修根   Root relief
齿向修形   Axial modification;
Longitudinal correction
齿端修薄   End relief
鼓形修整   Crowning
鼓形齿   Crowned teeth
挖根   Undercut
瞬时轴   Instantaneous axis
瞬时接触点   Point of contact
瞬时接触线   Line of contact
端面啮合线   Transverse path of contact
啮合曲面   Surface of action
啮合平面   Plane of action
啮合区域   Zone of action
总作用弧   Total arc of transmission
端面作用弧   Transverse arc of transmission
纵向作用弧   Overlap arc
总作用角   Total angle of transmission
端面作用角   Transverse angle of transmission
纵向作用角   Overlap angle
总重合度   Total contact ratio
端面重合度   Transverse ratio
纵向重合度   Overlap ratio
标准齿轮   Standard gears
非变位齿轮   X-gero gear
标准中心距   Referencr centre distance
名义中心距   Nominal centre distance
分度圆柱面   Reference cylinder
节圆柱面   Pitch cylinder
基圆柱面   Basic cylinder
齿顶圆柱面   Tip cylinder
齿根圆柱面   Root cylinder
节点   Pitch point
节线   Pitch line
分度圆   Reference circle
节圆   Pitch circle
基圆   Basic circle
定位面   Locating face
外锥距   Outer cone distance
内锥距   Inner cone distance
中点锥距   Mean cone distance
背锥距   Back cone distance
安装距   Locating distance
轮冠距   Tip distance;crown to back
冠顶距   Apex to crown
偏置距   Offset
齿线偏移量   Offset of tooth trace
分锥角   Reference cone angle
节锥角   Pitch cone angle
顶锥角   Tip angle
根锥角   Root angle
背锥角   Back cone angle
齿顶角   Addendum angel
齿根角   Dedendum angle
任意点压力角   Pressure angle at a point
任意点螺旋角   Spiral angle at a point
中点螺旋角   Mean spiral angle
大端螺旋角   Outer spiral angle
小端螺旋角   Inner spiral angle
蜗杆   Worm
蜗轮   Worm wheel
蜗杆副   Worm gear pair
圆柱蜗杆   Cylindrical worm
圆柱蜗杆副   Cylindrical worm pair
环面蜗杆   Enveloping worm
环面蜗杆副   Enveloping worm pair
阿基米德蜗杆   Straight sided axial worm;ZA-worm
渐开线蜗杆   Involute helicoid worm;ZI-worm
法向直廓蜗杆   Straight sided normal worm;ZN-worm
锥面包络圆柱蜗杆   Milled helicoid worm;ZK-worm
椭圆齿轮   Elliptical gear
非圆齿轮副   Non-circular gear pair
圆柱针轮副   Cylindsical lantern pinion and wheel
针轮   Cylindsical tan tein gear ;pin-wheel
谐波齿轮副   Harmoric gear drive
波发生器   Wave generator
柔性齿轮   Flexspine
刚性齿轮   Circular spline
非圆齿轮   Non-circular gear
分度圆环面   Reference tosoid